Dec. 3, 2019 – Michael Peirone, COO of the Victoria Hand Project, holds up a 3D-printed hand, which a new grant will fund for dispersal throughout North America. (Nicole Crescenzi/News Staff)

VIDEO: B.C. researchers to offer low-cost prosthetic hands

The UVic-based group will now offer 3D-printed arm prosthetics and scoliosis braces to North America

A new grant to a team at the University of Victoria will allow rural communities in North America to have access 3D-printed prosthetics and braces.

The Victoria Hand Project (VHP) won a $1 million grant from the 2019 TD Ready Challenge. Since 2015, the VHP has provided low-cost, 3D-printed prosthetics to 130 people around the world with stations in Uganda, Egypt, Ecuador, Guatemala, Nepal, Haiti and Cambodia. VHP has two models of hands: a functional hand that can open and close if the wearer moves their shoulders and an aesthetic hand that appears more natural.

In July, the VHP also began printing braces for people with scoliosis in Nepal, a congenital spinal condition which affects three in 100 children.

ALSO READ: 3D printers make Victoria Hand Project a reality

Now, the options will be put forward to 200 amputees and 160 children with scoliosis in North America.

“By leveraging new technologies and engineering design, along with our clinical partnerships, we are able to create health care technology that is accessible for many people who normally cannot afford this care,” said Nick Dechev, executive director of the VHP.

The 3D-printing technology pares down the costs for prosthetics and braces to a fraction of their normal expense; a prosthetic hand or brace can cost thousands, but a VHP hand costs $80, while a brace costs $150.

“Surprisingly scoliosis braces are not covered by Canadian health care, and in the US if you don’t have insurance it’s not covered either, so there’s actually a huge need in Canada and the US,” Dechev said.

ALSO READ: Two-legged B.C. dog gets prosthetic leg

The 3D scanning and printing technology also helps move things forward quickly, with measuring, fitting and printing taking roughly a day.

Michael Peirone, chief operating officer for the VHP added that printers are stationed locally so that once a prosthetist has seen a patient, communities can make their own hands and braces, and any adjustments can be sent remotely.

“This is really big for us,” Perione said. “We’re really excited because there have been a number of Canadians who have approached us and we’ve tried to help them off the side of our desks but we couldn’t really afford it. Now we can help people across Canada and across the U.S.”

The funding will come through in mid-January. While exact communities have not yet been identified, Dechev said it’s part of the team’s goal to help people in the northern territories.

nicole.crescenzi@vicnews.com

Like us on Facebook Send a Tweet to @NicoleCrescenzi
and follow us on Instagram

University of VictoriaUVic

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Bride thankful ailing stepdad was able to walk her down the aisle

Ceremony held amidst pandemic in order to fulfill bride’s wish to have stepdad give her away

B.C. aquaculture farm’s employees sweat it out to raise funds for food banks

For every five minutes of exercise recorded, Cermaq Canada is donating a dollar to local food banks in communities they operate

Province pays $4.08 million for hotel to house fire victims

The Government of B.C. has purchased a new building to help people… Continue reading

Destination Campbell River relieved after receiving $65,400 provincial grant

The grant will help cover the peak-season operational losses during May to October and help in recovery efforts

VIDEO: Humpback whales put on a rare show near Campbell River

The ‘playful’ pod lingered by a local tour operator’s boat for quite some time

Only four new COVID-19 cases, 228 active across B.C.

Health officials watching as activities ramp up

Facing changes together: Your community, your journalists

The COVID-19 pandemic has changed the world in ways that would have… Continue reading

Mirror business directory and map

If you’d like to be added to the list, shoot us an email

Feds looking at ways to reunite families amid COVID-19 border restrictions with U.S.

Some families with members of dual-citizenship have become separated due to the pandemic

Condition in kids with possible COVID-19 link being studied in Canada

This month, the U.S. Centers for Disease Control and Prevention issued an alert to doctors about MIS-C

‘I knew what he wanted’: Kootenay man spends hours in tree as black bear patrols below

Francis Levasseur is no stranger to the outdoors, but a recent run-in with a bear caused quite a scare

COVID cancelled their wedding plans, so they married on a BC mountaintop

Ceremony was live streamed to friends and family around the world

Trudeau acknowledges racial unrest in U.S.; ‘We also have work to do in Canada’

‘Anti-black racism, racism, is real; it’s in the United States, but it’s also in Canada,’ Trudeau says

State of Local Emergency declared for Boundary as communities brace for river flooding

Warm weather and heavy rain could cause sections of Kettle River system to swell beyond 2018 levels

Most Read